I apologize for the delay, but wiring takes forever and I discovered one of the very small parts from the original design didn't work with the re-design (it is the LED holder assy. for the lamp in the house). I have included pic's of the individual parts of the lower portion of the turntable (TT), and then follow up with each stage of assembly (except all the wiring--with 2 exceptions--was completed first. I have shown the wiring on the underside of the foundation/track bed assy. with wiring to/from the connector array to the Arduino mount, lamp assy.'s, servo, slip ring connector, and Gantry connector. I then show the new connector approach to the lamps/lamp base, the man mount, man in the house, house assy., and a partial of the entire lower portion of the TT. More to come, but the Gantry assy. wiring takes a lot of time, and we may be looking to re-design in that area also.
|