Skip to main content

Reply to "3v or 5v for MTH 30-1306 ?"

@Lehigh74 posted:

The J and W BCR2s have a female plug.  The MTH 2.4 V rechargeable battery also has a female plug.  So, you can just unplug the battery from the wiring harness and plug in the BCR2.

John’s SBR has a male plug and as noted above it plugs directly into the board.  I just installed a few SBRs but didn’t feel like untangling wires or pulling the plug from the board so I replaced the male plugs with female plugs from an old MTH batteries.

Since the 2-8-8-2 has the AA cells, the SBR is the way to go.  That’s what I will most likely use the next time I replace batteries in it.

You don't really have to untangle much, just unplug the 2-pin connector and plug this one in.  You can leave the battery harness in place, it doesn't weigh much.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×