Skip to main content

Reply to "4-Chuff sound for K-Line Scale Hudson (Update 01/31/24)"

I make my own one piece cams but you can also 3D print them in halves so its much easier to install. You should at least lift the boards so you can see the micro switch as it will likely have to be adjusted. To replace a one piece cam all the rods have to come off and a driver pulled. If you mark the drivers location before removing you shouldn’t need a tool to requarter it.

Pete

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×