Reply to "50-1911 PS3 Steam upgrade kit DOA"

One issue I've found with the PS32 boards is the two boards are connected using a connector with a VERY SMALL pin engagement.  Any slight gap on that connector is sufficient to cause all sorts of issues, including appearing DOA.  With my new upgrades, I remove the board set from the carrier and strap around the connector with Kapton tape to insure the two boards stay firmly connected, then replace the board set in the carrier.

Another thing that can happen with the PS32 board is they will appear dead and giving them 10-20 minutes powered off and they adopt a new personality and come back to life.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×