Skip to main content

Reply to "700e hudson parts"

Since the OP was asking about a 700E, I went and looked at a 1939 700E.  The correct fastener would be 700E-44C. I went and looked and found that some of my spare screws would be a problem. See photos below. I would have though the screw pictured above was the cross head guide screw, but I have no experience with the 18005.

The upper screw is from an unknown source, but clearly could be a problem.  The lower screw is a proper eccentric crank screw for the 700E.  Below that are Lionel drawings for the screw.  

2B198EC4-374F-4B28-82E5-785E32589EADEEA37D6E-9B30-4DA9-9122-C16169E019DAC8FC3279-F0CD-4CCD-B8FD-63B3C65986451D206B01-9C85-48EA-BB7C-C8223A36E9C1

Attachments

Images (4)
  • 2B198EC4-374F-4B28-82E5-785E32589EAD
  • EEA37D6E-9B30-4DA9-9122-C16169E019DA
  • C8FC3279-F0CD-4CCD-B8FD-63B3C6598645
  • 1D206B01-9C85-48EA-BB7C-C8223A36E9C1

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×