Here are some more photos from different angles.
The two wires on the left go to the brushes.
There is a black wire that comes out of the motor, below the reverse mechanism, that attaches to the clip just above the wheel at the middle of the photo.
There is white wire that comes out of the motor, below the reverse mechanism, that attaches to the clip on the far right bottom.
There are two wires, one from the top of the coil and the other from the bottom of the coil, that attach to the clips on the far right.
There is a black wire that runs from the clip at the far right top, which goes to the clip at the top middle.
Not pictured, are the wires that go to the headlights, which attach to the clips next to the rotating plate on the bottom of this photo
NWL
