Skip to main content

Reply to "A Handy Little PCB for Adding Marker LEDs to a Hood Diesel"

Ok so assuming that the board will be wired directly to the track rollers, and in conventional you are not liable to exceed perhaps 12VAC to the track, you should use the blocker diode D1 as discussed, and R1 should be about 280 ohms for led currents in the range of 10-13 ma.

Hopefully that helps?

Rod

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×