Skip to main content

Reply to "A LOOK AT THE LIONEL ACELA"

Robert Cushman posted:

My back panto in 2026 is stuck up. How do I reset without taking apart? I have the panto seated in the u channel but it won’t move when I shuffle around with aux1 6 and changing directions.

If you power off the transformer you should get cycling when you turn it back on and power up the engine.

Hit reverse button and see if it cycles.  Make sure screws are not too tight.  I have always been OK after that.

Do you have the Rev. B PCBs for the Cat arms.  I did that on both sets when I cleaned and greased the worm gears.

I assume you did reset at some point.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×