Skip to main content

Reply to "A Question About Lionel Smoke Regulators"

Okay Guys......pics to follow.

The Regulators I have seen to date are all fastened to the frame with a screw and paste.

As mentioned, this is the first I have seen with the pad.  I really can't tell if the heat zinc is isolated or not or should be.  It seems that the screw may be surrounded by plastic.

You will see in the pics....a new Regulator from Lionel.....break open the shrink wrap.....raise the heat zinc and fasten it to the frame.  No screw or pad included.

Chuck....have you seen the Regulator attached both ways?  Is it possible that it was never suppose to be attached directly to frame and this may have been the issue all along with their premature demise?

Thank You

010011009019006

Attachments

Images (5)
  • 010
  • 011
  • 009
  • 019
  • 006

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×