Skip to main content

Reply to "A question for all who've purchased the new S gauge FlyerChief Polar Express set"

Originally Posted by Rayin"S":
Thanks, Ray, will do.

ogaugeguy,

If you look at Rusty's pictures above my post you can see on the bottom of the car the cast part of the car that is retained by two screws. the second picture shows the bottom of the car with the screws and the cast piece removed, with that piece off the rivets attaching the steps are visible. The drill size I used was 3/32" and as I stated I used a pinvise, and carefully removed just enough of the rivet so with slight pressure the step will come loose. I set these aside to possibly use on another project.

Ray

 

 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×