Thanks for the response. I understand that the pictures can be difficult sometimes to see the small wires but there are three wires going into the smoke unit, two black and one red That are part of the three pin connector.
over the weekend I installed an AC regulator and new smoke unit that I ordered from my Lionel. I now have heat to the element but the fan is not coming on. I also have no control over the smoke smoke unit using my TMCC remote.The element comes on immediately with track power and will not turn off to using the TMCC remote.
I tested the fan motor independently by applying voltage directly to the contacts and the fan motor does work
I also tried reprogramming the engine using procedures I found online. Reprogramming has not done anything for it.
thoughts?
