Skip to main content

Reply to "Add cruise to a dual motor Williams diesel"

I always place a mark on each flywheel and test the motors with a 9v battery with the wheels off the ground.  Then I wire the motors together and test again with a 9v battery to see if both flywheels turn the same direction ( off the ground) Then I test the motors on a 3 foot section of track to see if the engine runs right.  This way I don't screw up the ERR board.  If a 9v battery will not turn the motors I use a HO (DC) transformer but most of the time the 9v works.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×