Skip to main content

Reply to "Adding Speakers to dummy engines"

You will have to keep the TOTAL speaker impedance the same as it originally was. That means you will have to replace BOTH speakers.

 

For example, if the original speaker was 8 ohms, you can run two 16 ohm speakers in parallel, or two 4 ohm speakers in series. The 16 ohm speaker is a better bet from a reliability standpoint. If one speaker is disconnected, there is not too much load on the sound board.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×