Skip to main content

Reply to "Advice on Painting Rods on Steam Locomotive"

I take the rods off of my engines and just wipe them down with alcohol. Then while holding them with tweezers, I just dip them in Neolube. Put them on an aluminum pie pan and put them in the oven at the lowest setting until dry. Then back on the engine.

 

Gilly  

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×