Skip to main content

Reply to "AF engine 350"

Isolate the motor by unplugging or unsoldering the wires to the reverse unit.

Using a wire, jumper one brush connection to one field winding.

Apply power to the other brush connection and the other field winding.

The motor should run in one direction. Reverse the wiring to the brushes, and the motor should run in the opposite direction.

If the motor does not run, it is bad. Chances are a bad armature.



Larry

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×