Thanks for getting back so quickly. That picture totally clarifies this project. Regarding the secondary issue I had with the fastrack operating track, the uncoupler was okay, a wire underneath was totally fried. I replaced just that wire, and it's working. I have some PTCs on order, and will put them in as you suggested, however your track wiring you posted on the other thread isn't close to what I have, as far as I can tell. The B&W stock picture below looks like what I have. (FYI, the wire connecting the 2 red circles was the one that was fried.) It looks like the wire connected between the green and blue circle is what provides power the uncoupler. I think the PTC should go between the green circle and the uncoupler, Correct?
|