Reply to "Alterative lighting ideas for ceramic buildings"

I use the D56 cords with 12 VDC candelabra based LED bulbs I purchased very cheaply from China.  I installed 16 socket power strips under the table connected to a 12 VDC supply.  You have to keep your polarity correct.  I drilled a hole in the table and passed the plug/cord under the table and plugged it in.  D56 buildings with cords out the bottom of the building were easy and the cord doesn't show.  Buildings with cords out the back require a little camouflage.   i have a ton of D56 buildings on an elevated section where I still used the D56 cords.  I cut the cords and fastened under the elevated platform.  I used barrier strips to connect the cords together and had a single 12 VDC pair passing under the table.  Bulbs are similar to Avanti only screw base E12.