Skip to main content

Reply to "Altlas O F2/F3 Phase 1 w/ Cruise (Tach) Slows on curves and inclines, almost to a crawl! (Solved)"

You have factory EOB in those engines. Sounds like the cruise is off. Use the following sequence to turn cruise on in 128 step mode:

ENG + ## + DIR + AUX1 + AUX1 + AUX1 (you will hear whistle/horn blast) + 2 (you will hear whistle/horn blast)

In this mode, you can hit BOOST and the engine should start and run in speed step 1. Holding onto the coupler, you should feel the engine try to pull harder. 

Attached you will find instructions for accessing the different EOB modes in command mode using the CAB-1 or CAB-2.

Attachments

Files (1)

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×