Skip to main content

Reply to "Ameri-Towne Buildings Kitbash"

Jeffrey:

Plastic to plastic I use Plastruct Plastic Weld. It will melt the plastic and fuse parts together. If you are thinking wood then a good CA glue will suffice.

In addition if you are cutting walls and re-gluing it is a good idea to cover the joint with a piece of plastic for the added re-enforcement. Also make sure the surfaces to be glued are sanded flat.

Joe

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×