Skip to main content

American Flyer 4019 Resurrection

I have had this for a while and decided it was time for a resurrection. It came to me repainted by brush. None of the trim or rails had been removed so everything had maroon paint on it. The bell had been replaced by a bell from???? that is over 2 inches tall. Tore it all down, stripped the paint, polish up all the trim, filled a couple of spare holes that had been put in the roof, then primed and new paint. It will need to cure now for a few weeks before I paint the yellow window frames because the maroon will probably bleed into the yellow if it is not completely cured.

I did not realize it until I was cleaning them, but the headlight covers are hand made. Runs nice, very happy with the results.

 

Steve

 

 

4019, 1 Starting Point

4019, 2 The pieces

4019, 3 Removing paint

4019, 4 Paint be gone

4019, 5 Filling the extra holes, bottom

4019, 6 Filling the extra holes, top

4019, 7 Filling the extra holes, Bondo

4019, 8 It's Drying Time

4019, 9 Almost there

4019, 10 Ready to Roll

4019, 11 Ready to Roll

Attachments

Images (11)
  • 4019, 1 Starting Point
  • 4019, 2 The pieces
  • 4019, 3 Removing paint
  • 4019, 4 Paint be gone
  • 4019, 5 Filling the extra holes, bottom
  • 4019, 6 Filling the extra holes, top
  • 4019, 7 Filling the extra holes, Bondo
  • 4019, 8 It's Drying Time
  • 4019, 9 Almost there
  • 4019, 10 Ready to Roll
  • 4019, 11 Ready to Roll
Original Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×