Skip to main content

Reply to "American Flyer Y3: Two Right Feet"

The front #3 doesn't have the gear.  The wheel would have to be pulled off and placed on the rear #3 axle, plus more importantly be quartered properly.

More work than I care to go into right now.

Rusty

Hi Rusty,



i’m a bit confused now. Is the problem part the eccentric crank that connects to the bit on the wheel or is it the bit that is attached to the wheel?

If it is the bit that is attached to the wheel only then that is what I was thinking about by getting the front wheel assembly which is known to be good and just pull the crank pin from the wheel which is attached to the engine still and then put on the front spare crank pin, that way you are not having to mess with too much stripping down and any quartering.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×