OOPS! I found a small error in the original attachments in my first post. The R3/R4 resistors were shown as 200K; they should be 150K for a 1 Hz flash rate. I attached the modified schematic scan and the BOM in the original post; the only two files affected. The gerbers are not affected. Sorry for the confusion.
FWIW here are the approx. flash rates you should get with various R3/R4 values (with C2/C3 of 22uF):
240K; 0.8 Hz
200K; 0.9 Hz
150K; 1.0 Hz
100K; 1.1 Hz
68K; 1.25 Hz
47K; 1.67 Hz
Bob; thanks for adding the comments on multiple parallel and series LEDs. Good to have that documented here also.
Rod