Skip to main content

Reply to "Another LED constant lighting question for passenger cars . . ."

stan2004 posted:
Rod Stewart posted:

...For grj's new board, I am thinking that since the center rail is the one carrying the DCS signal, the center rail pickups should be connected to pin 2 of the AC input (ie the round hole) since this connector runs through the 22 uH choke. Does that make sense? 

Doesn't matter.  Choke performs same function either way.  

Consider that the board works with 2-rail where DCS "hot" could be either rail depending on car orientation.  

 

 

Stan and John; thanks for this confirmation. Kind of what I figured but thought I would ask anyway.

TEDW; I notice in your pictures the 22 uH chokes you are using are considerably bigger than the ones I wound up with, which are 285 ma. Do you perchance have a current rating for them, and perhaps a P/N? Thanks.

Rod

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×