Chris - I finally did by removing the metal base, and repositioning the ‘customer’. Once operation was verified, I re-assembled the accessory. Appears to work properly now.
You may already know this, but moving the switch to ‘ON/MOM’ on the Remote Control Box only powers up the lights. Press and hold the button down to activate the motor. I’m using the optional 8” 3-pin female pigtail (6-82038) for power.
If I use the 8” 3-pin female pigtail (6-82038) without the Remote Control Box, the white wire powers the motor along with the red/black wires for the lights.