Skip to main content

Reply to "Atlas' Acquisition of MTH Tooling"

There are NCE and Digitrax camps as well. Luckily most boards will work with both.

Wish we could make TMCC / Legacy / DCS play nice and work with everyone's systems as well.

My club's modular layout is wired for both TMCC / Legacy & DCS. For the most part we don't have much trouble running both together these days. In the past DCS did not like our layout though.

Am running both Atlas and MTH 2-rail locomotives using the MRC Prodigy system.

Works great and no special wiring techniques. Actually I have experimented with great success using silver epoxy in the nickel-silver rail joiners. The nickel-silver rail bonds tightly with the joiners. The gap between rails fills with the epoxy so no click-clack. Welded rail effect. No need for multiple feeders.

Chuck

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×