Hey SANTIAGOP23: I have the same problem with all locomotives that have the QSI decoder, whether it's Atlas or 3rd Rail. I have two different DCC systems I can toggle between - Digitrax and NCE. With the NCE system it doesn't start the QSI equipped locomotives on power up, but the Digitrax starts anything QSI that is on a powered track. It must be sometime that the Digitrax and ESU Eco II have common in their software. Because of this I almost always use the NCE system. Also, Consists are much easier with NCE. If I have an ABBA setup I can select either A-Unit and that becomes the Lead Unit (sounds and going forward). With the Digitrax I can only run and have sounds if I have selected the Lead locomotive as it was set up in the consist. Not sure how ESU handles that. I really love the detail work you post, especially your 3rd Rail Rio Grande F-7's
|