Skip to main content

Reply to "Atlas Locomotive Electro Coupler swap?"

So that's my fault not looking at what forum I'm in.  If its the Atlas TMCC 2 rail model with the electrocoupler, then it would probably just accept a standard atlas 2 rail coupler and box without work.  You could try the SW insert, and it probably would work with either rail count, since the kadee height is standardized from the rail head (there is a pilot spacer associated with the insert to get the pilot height correct when you fix it). Since the lid of an atlas box is a bit thicker than the lid of a kadee box, you may need to put a shim inbetween the pilot and a kadee box, but a little experimenting would probably get it.

Last edited by Boilermaker1

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×