Skip to main content

Reply to "Atlas O MP15 with ESU Loksound Select L sound decoder upgrade"

I soldered the power connections to the pads on the top of the board and now it works great.  Apparently if doesn't matter but you need to make sure there is a connection between the pads and the traces which are on the in between layers of the board.  So if the solder doesn't flow into the very tiny holes in the pad they may not work.

Last edited by rdunniii

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×