Skip to main content

Reply to "Atlas turntable power"

You could put a terminal block near the  T table and run one set of paired wires from a separate tiu channe to the terminal  block )(fixed 2 or 1 one the var set to fixed)  . From the terminal block add a on/off  toggle to each track.  Using a spare channel will insure a great dcs signal.  I would use the same z-4000 handle for power, It's not like every track is going to be powered up at once with the toggles. 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×