Originally Posted by bdobson:
Maybe I am the only one with this challenge but when I look at the illustrations I can't make sense of them based on looking on an actual relay. I want to do this but I can't for the life of me figure out what goes where on a dpdt relay. 3 vertical inputs on each side and one horizontal on each side and one confused person.
Here is a spec sheet on the relays I posted above. There are diagrams and terminal markings. Also on most relays of this type the terminals and a little wiring diagram is printed on one side of the relay. Take a look and see if this helps.
Ask if you have questions and I will try to answer them as best as I can.