Skip to main content

Reply to "Back with another round of bone-head questions about TMCC"

I would run power from the transformer to each loop at least. That should give you better power distribution. And the TMCC U terminal to the outside rail. The TMCC power supply is to be plugged into a grounded outlet. Read the instructions on the CC switches but basically you hold the programming button until the lantern LED blinks and press SW on your hand held controller, press in the address you want, and then press SET. The lantern should go solidly on. That's about it... 

Last edited by cjack

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×