Patrick1544 posted:
I use that as a traction booster applied to one outer rail of a 5% grade; topside/inside rail detacked is best. I have used it on figures too,
Regular caulk can be painted 😉 Silicone isn't fun to paint
I have a few rolls of various gauges of stainless packaging wire and welding wire (.019-.040) and have used heat on the tip & melted some length of wire into figure heels (wire held with small pliers), then clip it to length.
A foot post limits the possibility of repositioning the figure "anywhere". (Unless you want to drill a bunch of holes in a nice platform, etc. )
The stainless wire,n high grade needles/ pins can often be pulled free of a melted figure foot later, but not always.