Skip to main content

Reply to "Big Boy smoke problem"

Carl, I have some questions. The red wire from the regulator goes to the smoke on-off switch and there is continuity to the board on the smoke unit. The brown wire goes to the motherboard so I'm thinking that's power to the regulator? The black wires go into black wire **** so not sure what is happening there. I seem to have more like 15V at the red wire on the smoke unit. Also, while doing all this, the fan is now on full-time as opposed to only when it chuffs. Does that mean I fried an IC? Still no smoke though I measured voltage at one side of the element. A 326 was never like this...

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×