Thanks every one. I just had a Bluerail board fail on me, and had to cheque wiring in series wasn't a possible cause, even thou I couldn't see how it could be. I think Ive worked out what caused it. Though I cant be 100% sure.
I had checked the nine pin connector, that came with my Atlas RSD7/15 and it seemed fine, so I wired everything up, and set it on the track, it connected but nothing happened on throttling up. I studied it carefully, and noticed that one wire was missing from the connecter, since some of the other wires had come louse too, I wasn't sure If I had lost it some how or if it was never there, and I hadn't noticed. The third wire in that goes to the motor was actualy the forth wire in, making it the negative to an LED, and the third wire in on the other side positive to the motor ( track polarity would change this ). So! could this blow the board, or is this Dave's first dud board? The up shot is Ive been chicken to try another board. cTr...( Choose the Right )
