RONALD WEATHER
okay each of the bpc outputs must be associated with either tr 1 or try 2
to set each bpc tracks
1-2-3 or 4 you must address the bpc and each track number and set to be powered by tr 1 or tr 2
I have 2 tpc's and 6 bpc's so mine work fine!
now in your first post you said you already setup the bpc by removing that plastic cover on pins correct?
if so and tpc/ tr 1 is set to conventional now you need to address your bpc push accessory button on remote then push the 1 on keypad then push the aux1 now push 1 on remotes keypad this last part let's you connect tpc/ tr 1 to bpc track 1.
I know this is all confusing but it will work so just try setting bpc's track 1 to be controlled by tr 1 using steps above. once you get it working follow same steps and use each successive number to connect tpc/ tr1 to control track/outputs 1 &3 sosare controlled by tpc/tr1
I can relate to the frustration as I was dumbfounded when I first tried getting all this setup and working and this was back when the tpc's and bpc's were first released.
hope this is more clear for you.