Skip to main content

Reply to "Brand New MTH F40PH Not Responding In DCS Mode **PROBLEM SOLVED**"

Here's the common denominator, both TIU's were successfully upgraded to the 5.0 software last year and I never tried loading an engine because I was dismantling my old layout.  Is there a possible problem that I am not aware of?

No, DCS 5.0 is absolutely not the culprit. Much more likely is a loose transceiver board in the TIU or the remote. This could have happened when you took the TIU and remote off the layout for upgrading and handled them differently than you do through normal use.

Connect the TIU's Remote Input port to the base of the remote with a 4-conductor (curly) telephone handset cord and see if things improve. If they do, we can proceed from there.


DCS Book CoverThis and a whole lot more is all in “The DCS Companion 3rd Edition!"

This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at MTH's web store!
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×