Skip to main content

Reply to "Brick made an angry pop when the breaker kicked."

Engineer-Joe posted:
cjack posted:
stan2004 posted:
Engineer-Joe posted:
... another popped up from Buffalo, NY right near me.

Note that the wiring diagram does not match!  

s-l1600

This is probably how I wired the new switch...

 

So I bought the wrong one of I need to rewire?

Switch should be fine; it's just the eBay seller's own diagram does not match his photo.  I'd do what cjack suggests.  I think cjack's diagram needs to be corrected to show the 1N4003 diode facing the other way.  Also, note that the 10k resistor should be of the 1 Watt rating.  Most guys have a stash of only 1/2 Watt resistors so if that's what you have then, say, two 1/2 Watt resistors of 5.1k or 4.7k in series would work.  It can be a chore to buy just one 1 Watt resistor mail-order or wherever.

Replacement%20Switch

 

Attachments

Images (1)
  • Replacement%20Switch

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×