Skip to main content

Reply to "Building a Lionel RCMC Board Test Fixture"

Thanks Gary.  Once I launched into the project, it was actually not that hard.  The hardest part is understanding the behavior all the signals on/off the boards.  Fortunately, Bruk's document provided most of that.

I'm going to embark on a project to do an updated model that will test the newest Legacy boards, the LCP2 and LCP3 boards.  It looks to be about 80+ or so the same as the RCMC tester, so it should go pretty smoothly.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×