Skip to main content

Reply to "Building a PRR/PC/CR G39 Ore Jennie - Scratch building with a laser, Part 2"

great work Jim. for the ladders. how about using a fold line? group the ladders (and brackets?) next to each other and set the laser to partially cut, then fold the ladders around the corner.

can the laser cut thin brass sheet: .010, .015 ?

 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×