Skip to main content

Reply to "CAB1L Speed Steps"

Legacy Locos can operate at 32, 100, or 200 speed steps.  Non-Legacy only 32 speed steps.  Cab1 and Cab1-L operate in relative mode, speed step selection is in the loco with running Legacy locos, not the Cab. 

 

With the Cab1 or Cab1-L, use the L(32), M(100), or H(100 w/ some momentum) on Legacy locos to set desired operation.  Non-Legacy, this sets the momentum; with the exception of aftermarket locos which cannot support Momentum if they have Cruise.

 

The TPC will operate just fine on all speed step selections with the Cab1 or Cab1-L, as he TPC was designed back in the TMCC only days.  With a Cab-2, use the Cab1 setting.

 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×