Skip to main content

Can I Control Lionel Legacy and TMCC with the MTH DCS Remote?

I'm thinking it is possible, but not sure what MTH or Lionel cables I need.

My previous layout (before I had to take it down in order to move to a larger apartment) was wired as follows:

0 - Wiring My Layout 2020-05-06

Seems like with it wired as above, I can run both MTH and Lionel, but need to use BOTH remotes. I'd like to minimize the use of the Lionel remote.

If I understand the MTH DCS wiring diagram:

MTH DCS Connection Diagram

I should be able to run MTH and Lionel TMCC/Legacy using only the MTH DCS remote (realizing not all TMCC/Legacy features may be available).

I'm guessing I need the 50-1032 (TIU_TMCC-Legacy 6' Connector Cable) which connects the LEGACY Command Base to TIU? What else would I need? Maybe also need the Lionel LCS DB-9 Cable w/Power Supply (6-81499 ) AND the Lionel LCS Serial Converter 2 (SER2)  (6-81326)?

Attachments

Images (2)
  • 0 - Wiring My Layout 2020-05-06
  • MTH DCS Connection Diagram
Original Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×