I have tried every suggestion with both of these transformers. Nothing is working as it should.
I bring the throttle down to zero. Pres the three buttons; green light starts flashing indicating it's in programming mode; then raise throttle to desired setting; I'm raising it to 75 as I want 14 volts; I've tried raising it quickly - like in 5 or less seconds - although the instructions say "slowly"; I've raised it taking up to 30 seconds; then I release the three buttons and that's when the green light is supposed to stop flashing indicating the voltage has been set. The green light never stops flashing until I unplug the transformer.
Wondering if the age of these transformers - one came with a RTR set in 2010 and the other in 2011 - is the problem.
Voltage on the track side is correct. I know the first time I tried this long while ago, the voltage on the accessories side was set at 8 volts and after trying to raise it, it's now stuck at 1.0 volts.
I'm thinking about giving up and moving on. This will work great on my test track for the track voltage.