Now I'm getting frustrated!
A package arrived today with 2 2' cables with 6 wire reversed connectors. Reversed connectors are the correct configuration for the TIU/AIU cable. I pulled the existing (working) cable off the TIU/AIU and connected each of the new cables in turn. Success! I then did the same with the second AIU (NOT daisy chained). Again, success! So now I know I have 3 good cables. Next, I tryed to connect both AIUs to the TIU(daisy chain). This resulted in failure to find the second AIU. I played with combinations of all 3 cables and both AIUs. No matter what I did, I always found 1 TIU and only 1 AIU. At this point, I'm thinking both AIU OUT ports on the AIUs are bad. Maybe they are dirty, as I've never used them prior to now. But honestly, why should they be dirty?
But the saga continues: I went back to the suspected bad (orange tag) cable. As expected, the connection failed. I figured I had confirmed a bad cable. BUUUUUT..... when I went back to the 3 good cables, NONE of them worked between the TIU and either AIU! So now I don't know what to believe nor what to do. Something is clearly wrong and intermittent. It's driving me nuts!
Chris
LVHR
