Skip to main content

Reply to "Cannot find AIUs"

Vernon,

Thanks for chiming in! I've been using a multitap Radio Shack wall wort in AUX power for forever. It has a slider switch for setting the voltage. I verified that it was set for 12v and put the voltmeter across the barrel. I'm getting 15VDC. That should be fine, correct?

I'm thinking about this and I may not have the pins labeled/tested correctly. Based on your pictures and annotations, when the port is installed on the PCB, the locking tab is down. That puts pin 1 in the far right side, correct? So if I flip it upside down by rotating the connection away from me, pin 1 is still on the far right. There are 2 rows of 3 pins each. The pin in the back right is pin1. Moving to the left,  the back row is 1,3,5 and the front row from the right is 2,4,6. Correct? If so, I should be testing the middle and left pins in the back row for 12 VDC. Let's see what I find.

John, Thanks for the help. I'll get to the bottom of this eventually!

Chris

LVHR

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×