Skip to main content

Reply to "cast drivers"

@bob2 posted:

If nobody is responding, what good does it do to lock them, awaiting a request to unlock so somebody can post?

Well, I tried to and people are responding.  I would ask, why lock them in the first place?  Does it service a purpose?

I did call Bob Stevenson today.  He was a lot of fun to talk with and I might, very helpful.  Why I'm interested in 0 scale drivers, is I plan on using them for a S scale engine up grade.  I've been looking for an 80" S scale driver -- with 17 spokes -- did some math and learned a 60" 0 scale driver is the correct diameter for an 80".  However, it's not that simple, other things to consider is tire width and hub diameter.  It's not a perfect one to one, but I have a candidate from Bob.  There even a 19mm back to back narrow gauge axle in 0 scale that would be just about right for S, available from Slater's which is where Bob gets his axles in he first place.

So far so good,

Tom Stoltz

in Maine

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×