Skip to main content

Reply to "Centering couplers"

I don't have a photo, but my go-to method is pretty simple; as stated above, no single solution will work well everywhere.

I bend a strip (1/4" wide or so) of relatively thin brass in a flat-bottomed "U" shape, slip it under the coupler shaft and attach the flat bottom to the car or loco frame with Goo or epoxy (Goo seems fine). You will have to play with the brass thickness, "U" width, appearance and so forth. They seem to work fine. If one ever fails or falls off, it is simple to re-attach or replace.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×