Skip to main content

Reply to "Chuff Generator Install Help"

Got the chuff generator installed in a lionel tmcc e6 6-18095.  This loc also has installed a cruise commander m and r4lc. The chuff generator is powered by a 5 volt dc board. Chuff test mode went well. Light flashes as it read each line on the tach strip. Configured the board to 4 chuffs per rev. Then things went south. Powered the loc up and the railsounds started right away. Engine responded to all commands. Attempted to move it forward and the engine creeped along as expected. The chuff sounded like a machine gun. Had to unplug the tender to make it stop. Retested the engine without the tender and all functions worked correctly.  Not sure what could be wrong. Reprogrammed the chuff board and no change. 

Any ideas?

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×