Skip to main content

Reply to "Chuff Generator question"

gunrunnerjohn posted:

I'm with Rod, I'd first test that idea.  Here's the C-G, it's 1 5/16 long, and the sensor on the back side is about 3/32 from the top.

Thanks to both of you guys, I'll order one this week and give it a shot. One more question, more towards the Super Chuffer wiring. Looking at the wiring diagram for the whole show with the Super Chuffer and the Chuff Generator, all the lighting for it says LED except the cab light which looks like the diagram says to use a 12v incandescent light. Does it have to be an incandescent or can it be a LED with a resistor to knock the voltage down to 3v? I'm not too sharp on electronics, wish I was. But before I go letting the magic smoke out of something because I did something I shouldn't have I thought I had better ask. 

Attachments

Images (1)
  • Screenshot_20190310-162930_Adobe Acrobat

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×