Skip to main content

Reply to "Chuff Generator question"

Unlikely you received bad boards, more than likely poor soldering job and you got a glob of solder across some of the pads where you soldered the wires to the super chuffer or you wired it wrong.  The headlight output should be no more than 3 volts, no resistor required.  Are you reading 10 volts is that the cab light circuit?  If so you  definitely  wired it incorrectly .  Pack it up and send it to John with all the bad boards.

Last edited by superwarp1

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×