Been working on it all day, but not a lot of progress to show yet. Decided to print the undercarriage and pilot detail separately to get the best results, then assemble them. Airtanks, pipes and filters have the glue drying, as does the fuel tank and it's sides. Speaker will be mounted in the fuel tank (grill is molded in the bottom). Pilots are printed, just waiting on the hoses to print. Once all the adhesives have cured, I'll hit them with a coat of primer. Paint was supposed to be here yesterday, but the good ol' USPS is up to their unreliable selves (had 2 different packages they're late delivering). Going with Tru-Color's C&O and B&O blue (TCP-072) and CNJ Tangerine (TCP-295).
Below is the detail for the brake hoses on the pilot, chain was supposed to go around the hoses and be hooked through the lower pilot opening, but it seems it's impossible to get the chain to print correctly. I may just go with some actual chain. Never mind the colors, they're just to help differentiate parts during construction, it all prints the same.
